immediately. As shown in Pic 6-7:
Pic 6-7
Battery Capacity:
5%——25% 1
st
Bar
25%——45% 2
nd
Bar
45%——65% 3
rd
Bar
65%——85% 4
th
Bar
85%——100% 5
th
Bar
6. Error Code
When the Ebike control system fails, the display will automatically show an
error code and the error code will flash. And stop normal work, only when the
fault is eliminated can exit the fault display interface (even if the display is
turned off without troubleshooting, the display will not work normally after
restarting the display), the error code list is detailed in the attached error code
definition table. The error code is displayed as shown in Pic 6-8:
To Next Page
Loading...
Need help?
General
