Why does the cuff on my AND Blood Pressure Monitor not inflate?
If the cuff on your AND Blood Pressure Monitor isn't inflating, it could be due to low battery voltage. If the LOW BATTERY mark is blinking, or if the batteries are completely drained, replace all batteries with new ones.
Why is my AND UA-1010 not measuring accurately?
Inaccurate readings on your AND Blood Pressure Monitor can occur if the cuff isn't applied correctly, if you move during the measurement, or if the cuff position is incorrect. Ensure the cuff is applied correctly, remain still and quiet during measurement, and position your arm on a table with your palm facing upward and the cuff at the same level as your heart. Also, if you have a very weak or irregular heartbeat, the device may have difficulty in determining your blood pressure.
Why is my AND Blood Pressure Monitor not measuring correctly?
If your AND Blood Pressure Monitor isn't providing accurate readings, there might be several reasons: * The cuff may not be applied correctly, so ensure proper application. * Movement during measurement can affect accuracy, so remain still and quiet. * Incorrect cuff position can cause issues. Sit comfortably, place your arm on a table with your palm facing up, and position the cuff at heart level. * A very weak or irregular heartbeat may cause difficulty in determining your blood pressure.
What to do if my AND Blood Pressure Monitor shows nothing on the display?
If your AND Blood Pressure Monitor's display is blank, even when powered on, the batteries may be drained. Replace all batteries with new ones. Another possibility is that the battery terminals are not correctly positioned. Reinstall the batteries, ensuring the negative and positive terminals match the markings in the battery compartment.
General| Model | UA-1010 |
|---|---|
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Inflation | Automatic by electric pump |
| Deflation | Automatic pressure release valve |
| Memory | Yes |
| Memory Capacity | 60 readings |
| Display Type | LCD |
| Measurement Range (Pulse) | 40 - 180 beats/minute |
| Accuracy (Pulse) | ±5% |
| Power Source | 4 x AA batteries or AC adapter |
| Cuff Size | Medium (22-32 cm) |
Describes how to perform a standard blood pressure measurement.
Step-by-step guide for battery installation and replacement.
Instructions on how to connect the air hose to the device.
Guide for connecting the AC adapter for power.
Guide to choosing the right cuff size for accurate readings.
Instructions on how to properly wrap the cuff around the arm.
Tips for ensuring accurate blood pressure readings.
Detailed steps for performing a standard measurement.
Important considerations for obtaining accurate readings.
To Next Page
