Why AND Blood Pressure Monitor shows different results at home?
Apprehension at a clinic or doctor’s office may cause an elevated reading. Home measurement reduces the effects of outside influences on blood pressure readings, supplementing the doctor’s readings.
Why AND Blood Pressure Monitor readings are too high or too low?
If your AND Blood Pressure Monitor isn't measuring correctly and the readings seem too high or low, ensure you remain still and quiet during the measurement. Movement can affect the accuracy. Also, sit comfortably with your arm on a table, palm up, and the wrist cuff at heart level. If you have a weak or irregular heartbeat, the device may struggle to determine your blood pressure.
How to fix AND Blood Pressure Monitor if power does not turn on?
If your AND Blood Pressure Monitor isn't turning on, there are a few potential causes. First, check if the battery is low and charge it if necessary. Second, there may be an internal error, try pressing the Reset Switch. Lastly, if the charging cable is connected, remove it and try again.
General| Brand | AND |
|---|---|
| Model | UA-1200BLE |
| Category | Blood Pressure Monitor |
| Language | English |
Device conformity to directives and intended use on adults in home healthcare.
Details the five measurement modes: In-App, Offline, Multiuser, Guest, and Visitor.
Instructions for charging the blood pressure monitor using the provided cable.
Information regarding the device's wireless capabilities and potential interference.
Details on Bluetooth version, compatible devices, and connection requirements.
Steps for enabling Bluetooth, pairing the mobile device, and managing multiple users.
Instructions for pairing multiple users with the monitor for data storage.
Guide on how to properly wrap the arm cuff around the upper arm.
Tips and procedures for obtaining the most accurate blood pressure readings.
Steps for taking measurements using the A&D Connect app.
Procedure for taking measurements without the A&D Connect app.
Process for transferring stored readings from the monitor to the app.
How up to 5 people can use and store readings on the app.
Procedure for taking measurements in visitor mode, data not stored.
Tips for ensuring accurate blood pressure readings.
Information on hypertension causes, control methods, and prevention.
Reasons and advantages of measuring blood pressure at home.
Classification of blood pressure levels based on WHO standards.
Explanation of daily and seasonal fluctuations in blood pressure.
Configuring user nickname and measurement start delay via the app.
Removing users, checking software updates, and unpairing devices.
Restoring the monitor to factory default settings.
To Next Page
