Why nothing appears on my AND Blood Pressure Monitor after pressing start?
If your AND Blood Pressure Monitor displays nothing after pressing the START button, it could be due to drained batteries. Replace all batteries with new alkaline batteries. Alternatively, the batteries might be incorrectly installed. Ensure the negative and positive terminals match the markings in the battery compartment during reinstallation.
Why AND UA-1030T readings are too high or too low?
If your AND Blood Pressure Monitor readings are too high or too low, ensure the cuff is fastened correctly. Also, remain still and quiet during the measurement. Check that the cuff is at the same level as your heart and that you are using the correct size cuff. Finally, relax for several minutes before each measurement to avoid skewed results from taking too many readings in a short period.
General| Model | UA-1030T |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Memory | 60 readings |
| Cuff Size | 22-32 cm |
| Display Type | LCD |
| Measurement Range (Pulse) | 40 - 180 beats/minute |
| Accuracy (Pressure) | +/- 3 mmHg |
| Inflation | Automatic |
| Deflation | Automatic |
| Power Source | 4 x AA batteries |
| Accuracy (Pulse) | +/- 5% |
To Next Page
