Why is the cuff not inflating on my AND Blood Pressure Monitor?
If the cuff on your AND Blood Pressure Monitor isn't inflating, it could be due to low battery voltage. You might see a blinking 'LOW BATTERY' indicator, or no indicator at all if the battery is completely drained. Recharge the battery to resolve this issue.
How to fix AND Blood Pressure Monitor when nothing appears on the display?
If your AND Blood Pressure Monitor displays nothing, even when turned on, the battery may be completely drained. Try recharging it. Alternatively, the battery's lifespan might be over, so consider replacing it with a new one.
Why does the battery run out so fast on my AND UM-211 Blood Pressure Monitor?
If your AND Blood Pressure Monitor's battery drains quickly even after recharging, the battery may be worn out. Replacing it with a new one should solve the problem.
What to do if my AND UM-211 readings are too high or low?
Inaccurate readings on your AND Blood Pressure Monitor can stem from several factors: * The cuff might not be applied correctly. Make sure it's properly positioned. * Movement during measurement can interfere with accuracy. Remain still and quiet. * Incorrect arm position can also cause issues. Sit comfortably, place your arm on a table with your palm facing up, and ensure the cuff is at heart level. If you have a very weak or irregular heartbeat, the device may struggle to determine your blood pressure.
General| Measurement Method | Oscillometric |
|---|---|
| Display Type | LCD |
| Accuracy (Pressure) | ±3 mmHg |
| Cuff Size | 22-32 cm |
| Memory Function | Yes |
| Measurement Range (Pulse) | 40 - 200 beats/minute |
| Accuracy (Pulse) | ±5% |
| Power Source | 4 x AA batteries |
Installation/storage location, flammable gases, oxygen environments, temperature, humidity, sunlight, shock, dust, stable location, chemicals, water resistance, electrical fields, shock damage, cuff/hose storage.
Safety, AC adapter use, specified options, cleaning, electrical devices, IV drips, doctor/medical worker use, ambulance/helicopter use, AC adapter connection, newborn/pregnant women, mastectomy, patient arm.
Error display, vital signs, air hose, wound, cuff position, measurement without cuff, patient status, peripheral arterial disease, AC adapter cable, wet hands, device maintenance.
Allowed battery, disposal, AC adapter removal, battery removal for storage, recharging.
Using after recharge, liquid leak, heating/breaking battery, shock/pressure, replacement.
Measurement in progress, Irregular Heartbeat, Memory, Pressurization, Auscultation, Battery full/low, AC connected/recharging, Errors (Err, CUF, E).
Internal errors (Err E, F, 9), AM/PM display, Pressure settings, Room temperature units.
Steps for battery replacement, cautions for battery use, lifespan, removal.
Setting fixed pressure to avoid re-inflation, selecting pressure values.
Importance of correct cuff size, arm size chart, cuff consumables.
Steps for correct cuff placement on the arm, index mark alignment.
Step-by-step guide for performing a standard blood pressure measurement.
Performing measurement with auscultation setting ON, steps for pressurization and exhaust.
Patient posture, relaxation, effects of stress/food/drink, irregular heartbeat, error conditions, cuff position, environment.
Common problems, possible reasons, and recommended actions (e.g., no display, cuff not inflating, no measurement).
Avoiding device damage, contacting dealer, recommended periodic inspection.
Steps for cleaning the device and cuff, disinfectants, cautions.
Type, measurement method, range, accuracy, temperature unit, power supply, number of measurements, classification.
To Next Page
