AND UA-767 Plus BT-C - User Manual

Questions and Answers

S
Stephanie GriffinJul 26, 2025
Why AND Blood Pressure Monitor readings are too high or too low?
- J
  john27Jul 26, 2025
  If your AND Blood Pressure Monitor isn't measuring correctly, giving readings that are too high or too low, it could be due to several reasons: * The cuff might not be fastened properly; ensure it is correctly fastened. * Movement during measurement can affect readings; remain very still and quiet. * Incorrect cuff position can also cause issues; sit comfortably, still, and raise your hand so the cuff is at heart level. * A very weak or irregular heartbeat can make it difficult for the device to determine your blood pressure.
N
Nicholas GarciaAug 6, 2025
What to do if my AND UA-767 Plus BT-C Blood Pressure Monitor display is blank?
- J
  john91Aug 6, 2025
  If nothing appears on the display of your AND Blood Pressure Monitor, even when it's turned on, the issue is likely with the batteries. Either the batteries are drained, in which case you should replace all of them with new ones, or the battery terminals are not correctly positioned. Make sure to reinstall the batteries, matching the negative and positive terminals to the indicators in the battery compartment.
M
Mark AdamsAug 16, 2025
Why does my AND UA-767 Plus BT-C Blood Pressure Monitor cuff not inflate?
- T
  thomas18Aug 16, 2025
  If the cuff on your AND Blood Pressure Monitor isn't inflating, it's likely due to low battery power. If you see the LOW BATTERY mark blinking, replace all the batteries with new ones. Note that if the batteries are completely drained, the low battery mark might not even appear.

Summary

Precautions

Using The Monitor

Installing; Changing The Batteries

Step-by-step guide for inserting and replacing batteries in the monitor.

Pairing The PBT-C Series Device With A Continua-Compliant Manager

Guide to connect the blood pressure monitor to a Continua-compliant device via Bluetooth.

Attaching The Arm Cuff

How To Take Proper Measurements

Essential tips and steps for obtaining accurate blood pressure readings.

Measurement

Measurements

Normal Measurement

Step-by-step guide for performing a standard blood pressure measurement.

Measurement With The Desired Systolic Pressure

Notes For Proper Measurement

Troubleshooting

Maintenance

Technical Data

AND UA-767 Plus BT-C Specifications

General

Type	Upper Arm Blood Pressure Monitor
Measurement Method	Oscillometric
Display	LCD
Memory	60 readings
Bluetooth Connectivity	Yes
Cuff Size	22-32 cm
Measurement Range (Blood Pressure)	20-280 mmHg
Accuracy (Blood Pressure)	±3 mmHg
Irregular Heartbeat Detection	Yes
Body Movement Detection	Yes
WHO Blood Pressure Classification Indicator	Yes
Power Source	4 x AA batteries
Measurement Range (Pulse)	40-180 beats per minute
Accuracy (Pulse)	+/- 5%