ANDILOG CENTOR EASY - Advanced Features

Operating Manual – V3.39
CENTOR EASY Force Gauge
- 8 -
V. Advanced features
CENTOR force gauge has several functions and settings, which makes it well adapted to the
achievement of any test.
To optimize the force gauge operation compared to your application, we will study all the setting
possibilities hereafter.
Parameters can be set via the setting menu by pressing the “ ” button.
The setting screen appears and the keyboard functions change:
Settings screen:
To move within the menu, uses “MAX ” and “UNIT” buttons
To select the required function, highlights it and press the “ ►TDX” button.
To exit uses “M” button.
Save and return to
previous screen
Move the cursor in
DOWN direction
Move the curson in
RIGHT direction
Move the cursor in
LEFT direction
Move the cursor in
UP direction
Backlight
Back to previsous
screen without
saving
LIMITS : set force thresholds to beep or
display a message
DISPLAY : Screen settings
IN/OUT : set input and output of the force
gauge
RS232 : set RS232 connection
STATS : Save your data
SYSTEM : general information of your
force gauge
MENU
CENTOR
LIMITS
DISPL AY
I N/OUT
RS232
S T AT S
S YSTEM
E ND
TDX