Need help?Do you have a question about the Andor Technology Zyla sCMOS 5.5 and is the answer not in the manual?
General| Sensor Type | sCMOS |
|---|---|
| Resolution | 2560 x 2160 |
| Frame Rate | Up to 100 fps (full frame) |
| Pixel Size | 6.5 µm |
| Read Noise | 1.0 e- (typical) |
| Interface | USB 3.0 |
Contact information for technical assistance and support.
Legal information and limitations of warranty.
Details on trademarks and patents held by the company.
Lists standard components supplied with the camera.
Explains how to connect power and signal cables.
Information on connecting coolant hoses for water-cooled models.
Explains the architecture and operational principles of sCMOS sensors.
Compares the two shutter modes and their application flexibility.
Details the nature and distribution of read noise in sCMOS sensors.
Explains the sensor's dual amplifier architecture for wide dynamic range.
Discusses options for optimizing sensor readout for various applications.
Describes different modes for triggering camera acquisition.
Outlines the available acquisition modes for the camera.
Essential safety precautions before installation.
Guides on securely mounting the camera.
Instructions for connecting and disconnecting coolant hoses.
Specifies the minimum computer hardware for operation.
Steps for installing the camera software.
Guide on installing the PCIe framegrabber card.
BIOS settings required for optimal performance.
Information on supported software and SDK.
Steps for connecting and powering on the camera.
How to use and adjust lens mount adapters.
Information on camera cooling systems.
Procedure for emergency power disconnection.
Routine checks for product integrity and safety.
Recommended annual electrical safety testing.
Instructions for replacing the camera's fuse.
Guidance on sensor chamber design and servicing.
Maintenance checks for coolant hoses and connections.
Steps to resolve issues with the startup buzzer.
Solutions for PC connection and recognition problems.
Troubleshooting steps for a continuously sounding buzzer.
Steps to address fan operational issues.
Troubleshooting cooling performance issues.
Troubleshooting for output signal malfunctions.
Steps to resolve external trigger input problems.
Diagnosing external condensation on water-cooled models.
Explains how condensation affects image quality and mitigation.
Detailed specifications for Zyla 5.5 and Zyla 4.2 PLUS models.
Common specifications applicable to all models.
Visual representations of camera dimensions and ports.
Mechanical drawings specific to air-cooled models.
Visual guide to dew point based on temperature and humidity.
Information on sales terms, warranty, and conditions.
Statement regarding WEEE regulations and disposal.
To Next Page
