Aneng M118A - Overview; Security Matters

—. Overview
This series multimeter is a pocket 3 5/6 bit true effective value automatic scanning digital
meter. Depending on the input voltage/current/resistance/equal signal, the instrument is capable
of automatic identification measurement. The series of instruments have the characteristics of
stable performance, high precision and clear reading. With the extra convenience of flashlight
and non-contact voltage test, it is an ideal instrument for factory, teaching and electronics
enthusiasts.
—. Security matters
Design of the series of meters in accordance with the 1EC1010 provisions (safety standards
issued by the International Electrotechnical Commission), please read the safety precautions
carefully before use the meter, the use of strict compliance with safety regulations, so as not to
Cause casualties or instrument damage.
1, When measuring the voltage, do not input the limit voltage exceeding the effective value
DC 600 V or AC 600V;
2, The voltage below 36 V is safe voltage, when measuring the voltage above 36 V, please
be sure to pay attention to safety. Because more than 36 V of voltage may cause damage to the
human body;
3, When changing function and range, the pen should leave the test point;
4, Select the correct function and range, beware of wrong operation, although the series of
instruments with full range protection function, but for the sake of safety, please pay more
attention to safety;
A sar,
5,
OF
BA
safety
symbol
states
“hazardous
voltage
exists
","
ground
“,”
double
insulation ,“" operator must refer to instruction ,"" low voltage symbol. mo