Need help?Do you have a question about the Aneng Q1 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Power Supply | 2 x AAA batteries |
| NCV | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| DC Current Range | 0-10A |
| AC Current Range | 0-10A |
| Resistance Range | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ |
| Capacitance Range | 10nF/100nF/1μF/10μF/100μF/1mF/10mF |
| Frequency Range | 0-10MHz |
| Duty Cycle | 1% to 99% |
| Temperature Range | -20°C to 1000°C |
Step-by-step guide for measuring AC and DC voltage using the multimeter.
Instructions for measuring AC and DC current with the multimeter.
Procedure for measuring electrical resistance with the multimeter.
Guide on how to test diodes and check for circuit continuity.
Steps for measuring capacitance using the multimeter.
To Next Page
