Aneng Q1 - Function Buttons

5
Function Buttons
①
②
③
④
⑤
⑥
⑦
①
Push for more than 2 seconds to turn on/off
the product.
•
The product automatically powers off
after
5 minutes of inactivity.
•
The built-in beeper beeps 5 times 1
minute
before auto power off.
•
To disable the Auto Power Off
function,
hold down while turning on the
product,
you will hear five beeps if you
have
successfully disabled the function.
Push to toggle between DCA/ACA when the
red test lead is plugging in the terminals to
test current.