3. When the frequency to be measured is
between 100kHz and 500MHz, push twice
to enter the ACmV Mode; touch the probes to
the desired test points, and the secondary
measurement display will show the frequency;
then push , the primary measurement
display will show frequency while the
secondary measurement display will show the
duty cycle.
Measure Temperature
1. Connect the black test lead to the COM Terminal
and the red lead to the VΩHz Terminal.
2. Push three times to enter the Temperature
Mode. Both displays will show room temperature;
the primary measurement display will show
Celsius while the secondary measurement
display will show Fahrenheit.
13
To Next Page
Loading...
