Aneng Q1 User Manual

14
2. Touch the probes to the desired test points.
3. Read the measured temperature on the
display.
Test NCV
1. Push twice to enter the NCV Mode.
2. Hold the product and move it around, the built-
in beeper will beep when the inner sensor
detects AC voltage nearby. The stronger the
voltage is, the quicker the beeper beeps.

Aneng Q1 Specifications

General

Display Type	LCD
Continuity Test	Yes
Diode Test	Yes
Power Supply	2 x AAA batteries
NCV	Yes
Data Hold	Yes
Backlight	Yes
Auto Power Off	Yes
DC Current Range	0-10A
AC Current Range	0-10A
Resistance Range	600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
Capacitance Range	10nF/100nF/1μF/10μF/100μF/1mF/10mF
Frequency Range	0-10MHz
Duty Cycle	1% to 99%
Temperature Range	-20°C to 1000°C