8.1 Instructions for service request
A N F I M Srl
Via B. Verro 33/5 -
20141 MILANO -
ITALY
Tel. (+39)
02/8465054 -
Fax. (+39)
02/8464401
8. Servicing
6.3 Scheduled inspections
It is recommended to check the grinder at least once every 6 months to make sure
it performs the best possible way ensuring a prefect grind and dosing consistency.
Contact your nearest authorised Anfim Service Centre for more information.
a) Check grind setting and adjust 2-3 a day, if necessary.
b) Ask your nearest Anfim service dealer to check the grinding discs for wear &
tear and have them replaced after grinding 600-800kg (Anfim steel discs).
c) Ask your nearest Anfim service dealer to check for regular wear & tear and to
replace worn parts, in case of need.
All technical interventions must only be performed by authorized personnel of
Anfim or one of its authorised servicer dealers.
8
To Next Page
Loading...
