EasyManua.ls Logo

Angelantoni CH2000 - Setting Up Temperature Cycles

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
9.4 SHUTDOWN
On the OP7 control panel (see relevant handbook):
in the manual mode press the K1 key;
in the automatic mode put the “
Start progr.
” field of the
Cycles menu to STOP.
End of cycle; the machine remains switched on.
or
turn the START/STOP key to 0 (OFF)
The cycle stops but remains set, and restarts when the
key is turned to START
or
turn the main switch (isolator switch) to 0 (OFF)
the
machine switches off completely. To restart the ma-
chine, follow the operations described in paragraph 8.1.
9.5 EMERGENCY SHUTDOWN
Turn the main switch (isolator switch) directly to 0 (OFF).
9.6 START-UP AFTER AN EMERGENCY
SHUTDOWN
After having eliminated the cause of the emergency
shutdown, proceed as follows:
Turn the main switch to I (ON).
Reset the cycle and start it up.
If shutdown lasts for a long time, switch on the machine
again by following the procedure described in para-
graph 8.1.
ULTRAVIOLET GENERATOR SPECTRUM FROM 125 W.

Table of Contents

Related product manuals