preferably 20º downwards. If you have a large pet weighing more than 50 lb, change to a 10º
downwards tilt.
With Pets
No Pets
To better detect the area where people may break in, rotate the motion sensor horizontally up to 30º.
Sensitivity
The sensitivity can be adjusted based on the room size. The default setting is medium sensitivity.
Mount the Motion Sensor
There are two methods of mounting the motion sensor at the selected location:
1. Use the 3M adhesive strip:
Snap the adjustable wall mount onto the motion sensor base.
Stick the adhesive strip on the back of the sensor, remove the film, and stick the motion sensor
on the wall.
Rotate the motion sensor to adjust the detection coverage.
To Next Page
Loading...
