Anker Prime - Important Safety Instructions

Important Safety Instructions
When using this product. basic precautions should always be followed :
1) Store this product in a cool and dry place .
2) Do not store this product in a hot or humid environment.
3) Using a power supply or charger not recommended or sold by the
product manufacturer may result in a risk of fire or personal injury.
4) Operating temperature should be between 32 to 95°F / 0 to 35°C .
5) Do not disassemble this product. Take 11 to a qualified service person
when service or repair is required Incorrect reassembly may result in
a risk of fire or personal injury
6) If this product is not used for an extended period . you should charge
and discharge 1t once every three months.
7) When charging a device. th is product may feel warm. This Is a normal
operating condition and should not be a cause for concern.
8) Under normal operating conditions. the battery performance will
decline over several years .
9) Do not expose the product to heat or fire.
1 OlOo not clean this product with harmful chemicals or detergents.
11) Misuse. dropping, or excessive force may cause product damage .
12)When disposing of secondary cells or batteries. keep those of different
electrochemical systems separate .
13)Beware that a discharged battery may cause fire or smoke.
14)CAUTION : There is a risk of explosion if the battery is replaced by an
incorrect type .
15)WARNING : The batteries (battery pack or installed batteries) shall not
be exposed to excessive heat. such as from the sun or fire.
16)A battery subjected to extremely low air pressure may result in an
explosion or leakage of flammable liquid or gas .
,
01 EN