What's in the Box
Overview
Recharging Your Expansion Battery
Using the Expansion Battery
Speci
fi
cations
Anker SOLIX BP3800 Expansion Battery USER GUIDE (A1790111-85)
What's in the Box
*The expansion battery can not be used by itself. It must be connected to the power station for charging and discharging.
Overview
On/O
ff
Button
Press for 2 seconds to turn on/o
ff
the expansion battery.
LED Light-Wheel
Flashes blue in sequence when recharging.
Indicates the remaining battery level with a 1-second press of the On/O
ff
Button.
Expansion Battery Ports
The two ports on the expansion battery have the same function, which can be
used to connect to the power station or other expansion batteries.
Recharging Your Expansion Battery
Please turn o
ff
the power station before connecting the expansion battery.
1. To activate for the
fi
rst time, connect the expansion battery to the power station with the included battery-to-host cable.
2. Recharge the power station via AC input or DC input.
*The plug varies by region.
When the expansion battery is connected successfully, you will hear a beep and will appear on
the power station's screen.
The expansion battery will be charged after the power station is fully charged.
Using the Expansion Battery
Please turn o
ff
the power station before connecting the expansion battery.
1. To connect, ensure the Anker SOLIX logo on one end of the cable is facing up. Plug it directly into the power station and plug the other end into any port of
the expansion battery.
To Next Page
Need help?
General
