What's in the Box
Overview
Using the Battery Connection Cable
Recharging Your Expansion Battery
Powering Your Devices
Storage and Maintenance
Specifications
Anker SOLIX BP1000/BP1000X Expansion Battery USER GUIDE
What's in the Box
*The expansion battery can not be used alone. It must be connected to the power station for charging and discharging.
Overview
Power Button
Press for 3 seconds to turn on / off when the expansion battery is disconnected from the power station.
Press for 2 seconds to stop or restart the connection between the expansion battery and power station.
LED Light-Wheel
Flashes white in sequence when recharging.
Indicates the remaining battery level with a 1-second press of the power button.
The light will automatically turn off after 30 seconds.
Expansion Battery Port
Connect the expansion battery to the power station via this port.
Using the Battery Connection Cable
The battery connection cable is used for connecting the expansion battery and the power station.
To connect, insert the cable directly with the Anker logo in the top center. You will hear a click when the cable is locked.
To disconnect, push the knob and turn it 12.5 degrees counterclockwise before pulling it out.
Recharging Your Expansion Battery
1. Plug the battery connection cable into the expansion battery and the power station.
To Next Page
Need help?
General
