AnkerWork H300 User Manual

EN-A3512FAQ
BasicOperation
HowdoIconnectAnkerWorkH300?
1. BluetoothConnection:
•
TurnontheheadsetbytogglingthepowerbuttontotheBluetoothpositionandholdingit
therefor2seconds.Theindicatorwillflashbluequickly.
•
Afterlettinggo,thepowerbuttonreturnstothepower-onposition,andtheheadsetwill
enterpairingmode.
2. DongleConnection:
•
Insertthedongleintoyourcomputer'sUSB-Aportortheadapter.
•
TurnontheheadsetbytogglingthepowerbuttontotheBluetoothpositionandholdingit
therefor2seconds.Theindicatorwillflashbluequickly.
Theheadsetanddonglewillconnectautomatically.
3. WiredConnection:
•
PlugtheUSB-AconnectorintothecomputerandtheUSB-Cconnectorintotheheadset.The
headsetwillconnecttoyourcomputer,andyouwillseeabluelightflashslowly.
HowdoIanswer/end/rejectacall?
Clicktheroundbuttontoanswer/endvoicecalls.Holdtheroundbuttonfor2storejectacall.
Findtheroundbuttoninthemiddleoftheearcover.
HowdoIreject/acceptmultipartycalls?
1. Continuethecurrentcallandrejectthenewcall:Holdtheroundbuttonfor2s.
2. Putthecurrentcallonholdandanswerthenewcall:Clicktheroundbutton.
3. Endthecurrentcallandanswerthenewcall:Pleaseuseyourphoneorotherdevicesto
performthisaction.H300isunabletoperformthisaction.
4. Endtheoldcallafteransweringthenewcall:Clicktheroundbutton.
HowdoIresetAnkerWorkH300?
HoldtheVolume+and-buttonsatthesametimefor5s.

AnkerWork H300 Specifications

General

Microphone	Yes
Frequency Response	20 Hz - 20 kHz
Driver Size	40 mm
Ear Cushion Material	Protein Leather
Connectivity	USB-C
Charging Time	2 hours
Impedance	32 Ohms
Wireless Range	10 meters
Multipoint Pairing	Yes
Microphone Frequency Response	100Hz
Microphone Sensitivity	-38dB

Summary

Basic Operation

How to Connect AnkerWork H300

Connect the headset via Bluetooth, dongle, or wired connection.

Call Management

Answer, end, and reject calls using the headset's round button.

Multiparty Call Handling

Headset Reset Procedure

Step-by-step guide to reset the AnkerWork H300 headset.

Button Issues

Microphone Mute Troubleshooting

Dongle Connection Issues

Dongle Connection Stability

Troubleshoot sound interruptions or disconnections when using the dongle.

Bluetooth Connection Issues

Dongle Automatic Connection

Automatic Reconnection to Two Devices

Call-Related Issues

iPhone Call Audio Routing

Microphone Performance Problems

Address issues where others cannot hear the microphone or it cuts out.

Audio Playback Issues During Calls

Resolve problems like not hearing others or poor audio quality during calls.

Software and Firmware Troubleshooting

Charging Issues

Headset Charging Stand Problems