Page 7 of 12
3. With the Tower Top now sitting down on the Tower Bottom, slide the Tower Top
forward until the front and back faces are flush with each other.
Note: you may need to use a small amount of force to get the two halves to align as
the fitment is tight.
Whilst bracing the Tower Bottom front face, tap the Tower Top with the palm of your
hand until the two halves are fully assembled.
4. The Fan is now ready to use.
5 Instructions for Use
5.1 Remote Control
Note: 2 x AAA batteries are not included.
The Fan comes with a remote control for your convenience.
The functions on the remote control are the same as the buttons on the Tower Fan.
To Next Page
Loading...
