Page 10 of 16
5.2.5 Massager – Dome
The fixed domed head on the massager can be used to Massage, but it also
has a heating function. The heating function can increase the sense of well-
being when used in conjunction with the massaging function. However, the
heat function can be used separately to the massage function. It is ideal for a
relaxing treatment. Refer to the “Heating” section of this Instruction Manual
for more information.
IMPORTANT
Do Not attach any of the Massage Heads when using the Heat Function.
5.3 Attaching the Massage Heads
If you are not using the Heated Function, you can attach one of the Massage
Heads for your particular area of massage.
To do this, ensure the massager is not being charged and that it is turned off, then
turn the massager upside down so that the Massage Dome is pointing up.
Select the massage head required, and place on top of the Dome ensuring the
two locking tabs inside the underneath of the massager head are aligned with the
grooves and slots in the dome.
To Next Page
Loading...
