EasyManua.ls Logo

anko FR-P11 - Heat Function

anko FR-P11
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 9 of 12
• You can use the elastic straps on the back of the massager to attach to a chair
back for upper or lower back massage.
• The massager can also be used to massage your neck, shoulder, calf, thigh
and abdomen.
• Once you have found your most comfortable position for the massager on
your body, press the On / Off Button and the massager fingers will start to
rotate.
• After approximately 1 minute, the massager fingers will rotate the opposite
way.
• After approximately another 1 minute, the massager fingers will rotate the
opposite way, and so on.
• Do Not use for more than 15 minutes at a time without a 30 minute cool down
period in between uses.
Note: If you forget to turn the massager off after the recommended maximum
15 minutes of use, the unit will automatically turn off after approximately 20
minutes.
• When the product is in use, pressing the On / Off button for approximately 2
seconds (long press) will turn the unit off.
Note: Avoid using the massager before going to sleep or in conditions where
you may fall asleep when using the massager.
5.3 Heat Function
• To use the Heat Function, press the On / Off button to start the fingers rotating.
• Press the On / Off button again
and the massage fingers will continue to rotate
and the heat lamps will turn on glowing Red through the massager surface.
• After approximately 1 minute, the massager fingers will rotate the opposite
way.
• After approximately another 1 minute, the massager fingers will rotate the
opposite way, and so on.