Page 12 of 20
7 Care and Cleaning
7.1 Cleaning
To ensure optimal trimming efficiency, the Clipper must be cleaned regularly.
IMPORTANT: D
o Not use flammable liquids, chemicals, abrasive creams, steel
wool or scouring pads for cleaning.
T
he easiest and most sanitary way to clean the product is to wash the Clipper
head (not the clipper body) with fresh, warm (not hot) water each time after use.
To do this:
• Turn off the Clipper and ensure the USB cable has been removed from the
appliance.
• To remove the Clipper head, press the blade assembly forward with force,
and the blade assembly will pop out.
• You can brush out the hair with the small cleaning brush supplied and then
rinse the Clipper head for a minute or so until the hair has been washed
away.
IMPORTANT: DO
NOT use high pressure water or compressed air to try
and clean as you will damage the appliance.
O
nly use running tap water to rinse away the hair and allow the Blade to
dry naturally before re-assembly.
To Next Page
