Anntlent AN-CL70AV Plus

Questions and Answers

R
Robert ChapmanAug 12, 2025
What to do if my Anntlent AN-CL70AV Plus Extender booster has no effect?
- Q
  qwilsonAug 12, 2025
  If your Anntlent Extender booster isn't working, consider the following: * Verify the booster is connected in the correct direction. * Confirm with your mobile carrier that the frequency band is correct. * Ensure both the indoor and outdoor antennas are properly installed. * Check the outdoor antenna's location. If your phone only gets a stable 3-bar signal there, try a location with a stronger signal. * If you have a metal roof, position the outdoor antenna at least 3 meters above it.
N
Nathan JonesAug 19, 2025
Why does my Anntlent AN-CL70AV Plus Extender mobile phone receive full signal but cannot normally make a call?
- M
  Michael WarrenAug 19, 2025
  If your mobile phone shows a full signal but calls won't connect when using the Anntlent Extender, the booster might be self-oscillating. To resolve this, increase the distance between the indoor and outdoor antennas. Ideally, use a wall or metal barrier to separate them.
T
Taylor MunozAug 27, 2025
What to do if Anntlent AN-CL70AV Plus Extender booster has effect, but the effect is not ideal?
- M
  Mikayla DennisAug 27, 2025
  If your Anntlent Extender booster is working, but the effect is not ideal, check the strength of your outdoor signal. If you only receive one or two bars, contact customer service to ask about replacing the booster or antenna with a higher gain alternative.
C
csmithSep 2, 2025
How to fix Anntlent Extender LED is not light?
- H
  hmorenoSep 2, 2025
  If the LED on your Anntlent Extender isn't lit, try these steps: 1. Use an alternate power adapter. 2. Check the power outlet to ensure the current power adapter plug is securely connected.