Need help?Do you have a question about the Anntlent AN-CPAL45 Plus and is the answer not in the manual?
Automatically adjusts signal gain to prevent interference and self-oscillation.
System detects and eliminates self-oscillation for stable operation.
Device enters standby to save power when no calls are active.
Details FCC rules, device compliance, and precautions against interference in residential installations.
Explains LED indicators and connection ports for the booster unit.
Lists the necessary antennas and cables for proper booster operation.
Guide for installing the external antenna on the vehicle's roof.
Guide for positioning the internal antenna inside the vehicle.
Instructions for connecting the DC power cord to the vehicle's power source.
Suggestions for optimal placement of the booster unit.
Steps to resolve issues with the booster's LED indicator.
Solutions for when the signal booster provides no improvement.
Guidance for addressing cases where booster effect is weak or inconsistent.
Troubleshooting steps for when a signal is present but calls fail.
To Next Page
General
