Anritsu RA77OUA - Default Chapter; Table of Contents

CONTENTS
1.
2.
3.
4.
5.
GENERAL
1.1 Introduction
1.2 Features
OPERATION
2.1 Key Layout
2.2
Basic Operation
2.3 Sea
Clutter Suppression (STC)
2.3.1 Manual Sea Clutter Suppression
2.3.2 Automatic Sea Clutter Suppression
2.4 Rain and Snow Clutter Suppression
(FTC)
2.5 Measuring Target Bearings (EBL)
2.6 Measuring Target Rages
2.6.1 Rough
Range Estimation (Range Rings)
2.6.2
To Measure Accurate Ranges (VRM)
Observation
2.7 Stretching Echoes
from Target for Easy Target
2.8 Plotting locus of Echoes from Moving Targets
2.9 Setting Guard Zone around Your Ship
2.10 Off
- Centering
2.11 Rejecting Interference from Other Radars
2.11.1
What is Radar Interference?
2.11.2 Rejecting
Radar Interference (IR)
2.12 Erasing Heading Marker
2.13 Switching the Display Modes
2.14 The second
EBL and VRM
2.15 The floating function of the second EBL and VRM
2.16 Setup Modes
2.16.1 Entering Setup Mode
2.16.2 Return
to the Radar Mode
2.16.3 Description
of Each Setup Mode
2.17 Navigation Data Display
2.18 Caution
INTERPRETING RADAR PICTURES
3.1 Propagation Characteristics of Radar Radio Waves
3.2 Echo Strength and Incident
Angle of Target
3.3 Shadow Zones
3.4
False Echoes
MAINTENANCE
4.1 Preventive maintenance
4.2 Checking Fuses and Voltages
INSTALLATION AND ADJUSTMENT
5.1
5.2
5.3
5.4
5.5
5.6
8.7
5.8
Unpacking Instructions
Installation Materials
Power Requirements
5.3.1 Power Supply Voltages
5.3.2 Power Systems
Proper Location for Installation of Radar
5.4.1 Scanner Unit
Installing Scanner
Unit
Installing Display Unit
5.6.1 Cable Connection
5.6.2 Display unit grounding
5.6.3 Adjustments
Laying Cables
Installing the External Buzzer