Need help?Do you have a question about the Antec CP-850 and is the answer not in the manual?
General| Wattage | 850W |
|---|---|
| Input Voltage | 100 - 240V |
| Frequency Range | 50 - 60Hz |
| +12V Maximum Current | 70A |
| Over Voltage Protection | Yes |
| Over Power Protection | Yes |
| Short Circuit Protection | Yes |
| PFC | Active PFC |
| Main Connector | 20+4 Pin |
| ATX12V Connector | 1 x 4+4-pin |
| Dimensions | 150mm x 86mm x 160mm |
| +12V Rails | Single Rail |
| Connectors | 6 x SATA, 6 x Molex |
| Type | ATX |
| Output | +3.3V@A, +5V@A, +12V@70A, -12V@0.8A, +5VSB@3.0A |
| EPS12V Connector | 1 x 4+4-Pin |
To Next Page
