Need help?Do you have a question about the Antec HCG-620M and is the answer not in the manual?
General| Efficiency | 88 % |
|---|---|
| Total power | 620 W |
| Power factor | 0.99 |
| Input current | 9 A |
| AC input voltage | 240 V |
| AC input frequency | 50 - 60 Hz |
| Combined power (+12V) | 576 W |
| Combined power (+3.3V) | 130 W |
| Max output current (+12V) | 48 A |
| Max output current (-12V) | 0.8 A |
| Power protection features | Over current, Over power, Over voltage, Short circuit, Under voltage |
| Max output current (+3.3V) | 24 A |
| Max output current (+5Vsb) | 2.5 A |
| Maximum input current (@110V) | +12V, +3.3V, +5V, +5Vsb, -12V A |
| Power Factor Correction (PFC) type | Active |
| Voltage tolerance | 10 % |
| Parallel processing technology support | 2-Way CrossFireX, 2-Way SLI |
| Fan diameter | 135 mm |
| Fan location | Top |
| On/off switch | Yes |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Cabling type | Semi-Modular |
| Motherboard power connector | 20+4 pin ATX |
| Floppy drive power connector | 1 |
| Number of SATA power connectors | 6 |
| PCI Express power connectors (6+2 pin) | 2 |
| Safety | UL, cUL, CE, TÜV, CB, FCC, GOST-R, CCC, C-Tick, BSMI |
| Purpose | PC |
| ATX version | 2.3 |
| EPS version | 2.91 |
| Noise level | - dB |
| Bearing technology | - |
| 80 PLUS certification | 80 PLUS Bronze |
| Mean time between failures (MTBF) | 100000 h |
| Power supply unit (PSU) form factor | ATX |
| Sustainability certificates | RoHS, ENERGY STAR |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 150 mm |
| Height | 86 mm |
| Weight | 1900 g |
To Next Page
