Need help?Do you have a question about the Antec NeoPower 430 and is the answer not in the manual?
Details the innovative fan design for quiet operation and superior cooling based on load.
Explains Antec's system for using only necessary power cables, reducing clutter and improving airflow.
Lists the various modular cables included in the package for connecting drives and peripherals.
Instructions for physically installing the NeoPower PSU into the computer case using provided screws.
Guidance on connecting the 24-pin main power connector to the motherboard.
Instructions for connecting the 4-pin or 8-pin power connector for the CPU.
Guidance on connecting cables from the pack to the PSU, including PCI Express cable usage.
Steps for connecting the AC power cord and turning the PSU switch on.
Details the main NeoPower power supply unit and its included connectors.
Lists Molex, Serial ATA, and Floppy connectors with their respective quantities and descriptions.
Describes the PCI Express connector cable included with specific NeoPower models.
General| Wattage | 430W |
|---|---|
| Form Factor | ATX |
| Efficiency | Up to 85% |
| Modular | No |
| Cooling | 120mm Fan |
| Input Voltage | 100-240V |
| Dimensions | 150mm x 140mm x 86mm |
| +3.3V | 28A |
| +5V | 30A |
| -12V | 0.8A |
| +5Vsb | 2.5A |
| Over Voltage Protection | Yes |
| Over Current Protection | Yes |
| Short Circuit Protection | Yes |
| Type | ATX12V v2.0 |
| Main Connector | 24-pin |
| +12V Rails | 2 |
| SATA Power Connectors | 6 |
| Molex 4-Pin Connectors | 4 |
| Floppy Drive Connectors | 1 |
| Over Power Protection | Yes |
| Over Temperature Protection | Yes |
| Frequency Range | 50/60Hz |
| Connectors | 1 x 24-Pin ATX, 6 x SATA, 4 x Molex, 1 x Floppy |
To Next Page
