(https://en.antelopeaudio.com/wp-content/uploads/2018/02/Discrete-4-Remote-Control-app.jpg)
To use Discrete 4 Remote Control, it is mandatory that both your computer and mobile device are connected to the same
Wi-Fi network. Should any problems arise, please refer to the built-in app Troubleshooting Manual.
The Discrete 4 Remote offers:
• Preamp Gain Control and Type
• Volume Control
• Stereo Link Selection
• Clock Source and Sample Rate Selection
• Headphone Volume Control
The graphical user interface and workflow are very similar to the EasyPanel Control Panel on your Mac or PC, which has
been covered in great detail throughout this manual. You should be feeling right at home with the Discrete 4 Remote app
after reading it.
To Next Page
Loading...
