Antelope Discrete 4 - User Manual

UK Phone number +44 1925933423 / US Phone Number (916) 238-1643
US time: 7:00 a.m. – 6:30 p.m. (EDT), Monday – Friday / European time: 10:00 a.m. – 10:00 p.m. (EET), Monday – Friday
What can we help you with?
Discrete 4 User Manual
Modified on: Tue, 26 Jun, 2018 at 7:36 AM
NEW LEVEL STUDIO POWER
Expensive-sounding discrete mic preamps and vintage gear emulation
The Antelope Audio Discrete 4 console-grade discrete microphone preamp interface comes with four 6-transistor discrete
preamps, 121dB dynamic range conversion, and rock-solid clocking. Discrete 4 also features the Antelope Audio premier
real time FPGA FX modeling of iconic studio gear from BAE, Lang, Gyraf Audio, FET, and many more.
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer servicing to qualified
service personnel.
Do not expose the device to rain, moisture or spillover of liquid of any kind. Should any form of liquid or a foreign
object enter the device, do not use it. Switch off the device and unplug it from the power source.
Do not use the device until the foreign object is removed or the liquid has completely dried and its residues fully
cleaned up. If in doubt, please consult with the manufacturer.
Do not handle the power cables with wet hands! Make sure the device is switched off when plugging and
unplugging it from the power source.
Avoid placing any objects on the cabinet or using the device in a narrow and poorly ventilated place. Doing so
could affect its operation or the operation of other closely located components. If anything goes wrong, turn off the
device first and unplug the power.
Do not attempt to repair the device yourself: consult authorized service personnel or your dealer.
Do not install the unit near any heat sources such as radiators, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not use harsh chemicals to clean your Unit. Clean only with specialized cleaners for electronics equipment.
Connect all your devices before powering your Unit. This unit is connected via its power cord to the mains safety
earth. Never operate the unit without this earth connection.
Power supply cable should be routed so that it is not likely to be walked on or squeezed by items placed upon or
against it.
To completely turn off the device, unplug the power cable first from the outlet and then from the rear panel of the
unit.

Summary

Safety Notes

General Safety Precautions

Important safety guidelines and warnings for operating the Discrete 4 to prevent hazards.

Features

Quick Start Guide

Initial Setup and Installation

Step-by-step instructions to connect, install drivers, and launch the control panel.

Software and Control

Antelope Audio Launcher

Overview of the launcher for updates, control panel access, and connections.

Control Panel Interface

Introduction to the Discrete 4 EasyPanel Control Panel interface and its main sections.

Preamp Controls

Preamp Gain and Input Modes

Controlling preamp gain, linking preamps, and selecting Mic/Line/Hi-Z input modes.

AFX Rack and Effects

AFX Rack Workflow

Discrete 4 Remote Control App

App Overview and Features

Using the mobile app to remotely control the Discrete 4's features.

Routing System Management

Input;Output Categories and Types

Troubleshooting Guide

Startup and Sound Troubleshooting

Resolving issues related to control panel, drivers, and audio signal routing.

Connectivity and DAW Troubleshooting

Diagnosing connectivity problems and DAW integration issues.

Antelope Discrete 4 Specifications

General

Number of Inputs	4
Number of Outputs	4
Sample Rate	192 kHz
Bit Depth	24-bit
Phantom Power	Yes
Digital Outputs	ADAT, S/PDIF
Channels	4
USB	USB 2.0
Clock Technology	64-bit Acoustically Focused Clocking