Author: Trygve Svärd, KD0PNQ
updates by Duane Reese N6DMR 11
when the D578UV is powered off with its front power button. The D578UV can be returned to
local operation by pushing the “EXIT” button on the radio, or by turning off the BT01 Mic.
Microphone Cable
The BT01 Mic is delivered with a 2 feet coiled cable. To use this cable, make sure you set the
BT01 Mic during power up to “UART PORT” before you connect the BT01 microphone to the
D578UV radio with the cable. When the cable is in use, the D578UV radio will supply power to
the BT01 microphone, and the battery inside the BT01 Mic will be charged from the radio. A
standard CAT5 cable of longer length may be used if the power from the radio is desired for the
BT01 Mic.
Battery Capacity
The built-in battery is a lithium type battery which may be sensitive to extreme cold
temperatures. The battery typically will last for 12+ hours when the BT01 Mic is connected to
the radio via Bluetooth and the display is on constantly. When connected with the cable to the
radio, the battery is being charged from the radio.
To Previous Page
Loading...
Need help?
General
