Anywave ACT-5X+ - Page 10

ACT-5X+ Exciter User Manual
Version 1.1 5/8/2015 Page 10 of 33
3
Negative Transition (20%~80%)
ps
 1200
4
Deterministic Jitter
%
 10
5
Random Jitter
%
 8
Note
1) The electrical interface characteristics are measured under normal conditions. Values may vary.
2) Operating in abnormal conditions may result in damage to the equipment. Long operating hours in
severe environments may reduce the reliability of the entire system, which may cause permanent
damage to equipment. Make sure all electrical interface characteristics and environmental parameters
are within the defined range listed above before operating this equipment.