Need help?Do you have a question about the Anzzi BYNE Series and is the answer not in the manual?
Lists essential tools and materials required for installation.
Drill holes according to the provided diagram and specifications for installation.
Connect hot and cold water supply lines to the faucet valve as illustrated.
Install the diverter adapter onto the pipe using Teflon tape for a secure fit.
Attach the spout, using the male thread adapter if needed, with Teflon tape.
Mount the shower arm anchor and then secure the shower arm with provided set screws.
Install the shower head and connect the braided hose to the diverter and shower arm.
Mount the diverter assembly and connect the longer hose to the shower wand.
Slide the cover plate onto the wall and secure the faucet knob using the Allen key.
Attach the faucet handle and screw the shower head onto the shower arm.
General| Number of Bars | 1 |
|---|---|
| ADA Compliant | Yes |
| Warranty | Limited Lifetime |
| Mounting Location | Wall |
| Primary Material | Metal |
| Material | Metal |
| Installation Type | Wall Mounted |
To Next Page
