Need help?Do you have a question about the Anzzi LLANO Series and is the answer not in the manual?
Official installation guide for the ANZZI LLANO & Colossal Series shower panels.
Identifies the specific models covered by this installation guide: SP-AZ047 and SP-AZ8095.
Detailed list of all components included with the shower panel, specifying part numbers and materials.
Essential preparation steps and recommended tools required prior to beginning installation.
Technical diagram outlining dimensions, features, and material specifications for the shower panel.
Instructions for drilling holes and mounting the support brackets for the shower panel.
Steps for attaching the hand shower holder and the shelf to the main shower panel unit.
Guidance on connecting the hand shower to its hose and installing the main shower head.
Procedure for securely hanging the shower panel on wall brackets and connecting water supply lines.
Instructions on how to remove the water flow rate reducer if necessary.
Recommendations for cleaning and maintaining the shower panel to ensure longevity and appearance.
Details on the product's warranty coverage, exclusions, and terms.
Information on how to register the product and activate the limited lifetime warranty.
The ANZZI™ Llano & Colossal Series shower panel is a sophisticated and multi-functional bathing fixture designed to enhance the showering experience with its array of features and elegant design. This install guide provides comprehensive instructions for setting up and maintaining the shower panel, emphasizing ANZZI's commitment to "Perfection is our Tradition™."
The ANZZI™ Llano & Colossal Series shower panel integrates multiple water outlets and controls into a single, sleek unit, offering a versatile and luxurious showering experience. At its core, the panel features a prominent shower head, designed to deliver a heavy rain™ shower, providing a broad and immersive water flow. Below the main shower head, the panel incorporates several Acu-Stream™ high-pressure body jets. These jets are strategically placed to provide a targeted massage, offering a therapeutic and invigorating sensation.
A key component of its versatility is the Euro-Grip™ hand-held sprayer, which allows for more focused cleaning and rinsing. This hand shower can be set to either a 1-setting or 3-setting mode, depending on the specific model (SP-AZ047 or SP-AZ8095), providing different spray patterns for various needs. The panel also includes a diverter, which allows users to easily switch between the different water outlets—the main shower head, body jets, and hand shower—providing complete control over the water flow. A mixer is integrated to control both water temperature and pressure, ensuring a comfortable and customized showering experience.
The panel's design incorporates a tempered glass body, giving it a modern and refined aesthetic. A small glass shelf is also included, offering a convenient space for toiletries. The internal plumbing consists of durable brass connectors and faucet bodies, ensuring longevity and reliable performance. The unit is equipped with 1/2" connections for hot and cold water supply, making it compatible with standard plumbing systems. For regions with water conservation regulations, the unit includes a GPM reducer, which can be removed if local codes do not require such restrictions, allowing for a higher flow rate of 2.5 GPM.
The ANZZI™ Llano & Colossal Series shower panel is designed for intuitive and user-friendly operation. The installation process begins with preparing the wall by drilling holes for the mounting brackets. The guide specifies drilling two holes 1 inch apart for the top bracket and two more 1 inch apart for the bottom bracket, ensuring a secure and stable attachment to the wall. Wall anchors are then inserted into these pre-drilled holes, followed by securing the shower panel brackets with Philips head screws.
Once the brackets are in place, the hand shower holder is inserted through a pre-drilled hole on the shower panel. The water supply hose for the hand shower is then connected to the holder, with an emphasis on ensuring all O-rings are properly inserted to prevent leaks. The hand shower itself is then installed onto the hose. For the main shower head, it is screwed onto the upper threaded connection on the shower panel.
The final step in the installation involves connecting the hot and cold water supply hoses from the shower panel to the corresponding supply lines in the wall. After these connections are made, the shower panel is carefully hung onto the secured mounting brackets.
Operating the shower panel is straightforward, thanks to its clearly labeled mixer and diverter controls. Users can easily adjust the water temperature and pressure using the mixer knob, while the diverter allows for seamless switching between the various shower functions: the overhead shower, the invigorating body jets, and the flexible hand shower. The hand shower's multiple settings (if applicable to the model) provide additional customization for the spray pattern.
For those who wish to maximize water flow, the GPM reducer can be disassembled. This involves loosening the fastening nut of faucet body 1 and unscrewing the hexagon nut from faucet body 2. Faucet body 1 is then pulled, and faucet body 2 is pressed to remove the reducer. Afterward, the fastening nut and hexagon nut are tightened back into place.
Maintaining the ANZZI™ Llano & Colossal Series shower panel is crucial for preserving its lustrous appearance and ensuring its long-term functionality. ANZZI™ products are crafted with superior quality standards, but regular care and cleaning are essential.
The recommended cleaning routine involves using regular soap and hot water with a non-abrasive cloth or sponge. This method is effective for routine cleaning and helps prevent the buildup of deposits and grime, which can become more difficult to remove over time.
If stronger cleaning solutions or chemicals are deemed necessary, it is imperative to first test the product on an inconspicuous area of the shower panel. This precaution helps ensure that the cleaning agent does not damage or discolor the surface. After applying any cleaner, all surfaces must be wiped clean and rinsed completely with water immediately. It is also important to rinse and dry any overspray that lands on nearby surfaces to prevent potential damage. A critical instruction is to NOT ALLOW THE CLEANER TO SOAK on the surfaces. Adhering to these simple principles will help maintain the ANZZI™ product's original luster and stunning appearance for years to come.
The product is backed by a limited lifetime warranty for the original consumer purchaser, covering defects in materials or workmanship. For industrial, commercial, and business usage, a five-year limited warranty applies. This warranty excludes damages due to misuse, abuse, or normal wear and tear. Customers can contact ANZZI™ support for warranty claims and replacement parts, ensuring continued support for their product.
General| Primary Material | Brass |
|---|---|
| Number of Handles | 2 |
| Number of Holes | 3 |
| Handle Type | Lever |
| Flow Rate | 1.2 GPM |
| Finish | Brushed Nickel |
To Next Page
