The ANZZI Mezzo Series (Models SH-AZ037, SH-AZ038, SH-AZ039) is a shower system designed for residential use, emphasizing "Perfection is our Tradition™." This manual provides comprehensive instructions for installation, care, and maintenance, along with warranty information.
Function Description:
The ANZZI Mezzo Series is a complete shower system that includes a shower head, shower arm, mixing valve, and a bathtub spout. It is designed to deliver both hot and cold water, allowing users to control temperature and divert water flow between the shower head and the tub spout. The system integrates a single-handle mixing valve for ease of use and a diverter knob for switching water output.
Important Technical Specifications:
- Connections: All plumbing lines connect via 1/2-14 NPT threads.
- Dimensions:
- Shower arm length: 451 mm [17.74 inches]
- Shower head width: 349 mm [13.74 inches]
- Mixing valve body depth (from wall): 67 mm [2.62 inches]
- Trim plate dimensions: 150 mm [5.91 inches] (width) x 190 mm [7.48 inches] (height)
- Spout projection: 190 mm [7.46 inches]
- Spout height from connection: 50 mm [1.97 inches]
- Overall height of the mixing valve assembly (from bottom of spout to top of shower arm connection): 213 mm [8.38 inches]
- Certifications: ASME A112.18.1/CSA B125.1, indicated by the UPC® mark.
- Materials: The parts list indicates components such as a flange, shower arm, shower head, trim cap, cartridge, sleeve, body, check valve, trim plate, knob, handle, and spout, suggesting a durable construction suitable for bathroom environments. O-rings are used for sealing connections.
Usage Features:
- Single-Handle Control: The system features a mixing valve with a single handle (14) for easy adjustment of water temperature and flow.
- Diverter Function: A dedicated diverter knob (13) allows users to switch the water flow between the shower head (3) and the bathtub spout (28).
- Shower Head: A fixed shower head (3) provides a consistent water spray for showering.
- Bathtub Spout: A dedicated spout (28) is included for filling a bathtub.
- Cartridge System: The internal cartridge (8) is responsible for mixing hot and cold water, ensuring smooth operation and temperature control.
- Easy Installation: The manual provides a step-by-step guide for installation, including connecting plumbing lines, attaching the shower arm and head, and installing the trim plate, knob, handle, and spout. Recommended tools include a screwdriver, channel locks, goggles, adjustable wrench, Teflon tape, and an Allen key.
Maintenance Features:
- Regular Cleaning: It is recommended to clean the product regularly with regular soap and hot water, using a non-abrasive cloth or sponge. This helps prevent the buildup of deposits.
- Chemical Cleaning (Caution): If stronger cleaning solutions or chemicals are deemed necessary, they should always be tested on an inconspicuous area first. After applying any cleaner, all surfaces must be wiped clean and rinsed completely with water immediately. Any overspray on nearby surfaces should also be rinsed and dried.
- Avoid Soaking: Cleaners should not be allowed to soak on the product's surfaces.
- Parts Replacement: The manual includes a detailed parts list, which is useful for identifying and ordering replacement components if needed. Information for obtaining replacement parts is provided, directing users to www.SpaWorldParts.com.
- Warranty: The product comes with a Limited Lifetime Warranty for the original consumer purchaser, covering defects in materials or workmanship. For industrial, commercial, or business usage, a five-year limited warranty applies. Warranty claims can be initiated by calling 1-844-44-ANZZI or emailing support@ANZZI.com. Proof of purchase is required for all warranty claims. Shipping and handling fees are not covered under the warranty.
- Registration: Product registration is encouraged to activate the Limited Lifetime Warranty. This can be done via email, fax, mail, or by filling out the provided product registration card.
Need help?
General
To Next Page
