Tighten the fastening nut and the hexagon nut.
Due to water conservation laws, this unit is equipped with a GPM reducer. If your local
code doesn’t have a restriction requirement, you can use the following steps to remove
the reducer.
Setp 5C
Use hand to pull the faucet body 1 and press the faucet body 2 to take the reducer out.
Setp 5B
Loosen the fastening nut of the faucet body 1
unscrew the hexagon nut from the faucet body 2.
Setp 5A
NOTE:
DISASSEMBLE (GPM REDUCER)
Reducer
PERFECTION IS OUR TRADITION™
pg. 9
5A-5B
faucet body 2
faucet body 1
5C
To Next Page
Loading...
