12
Clear Vision
1. When there is no OSD, Press the “ <” button to activate Clear Vision.
2. Use the “ <” or “>” buttons to select between weak, medium, strong, or off settings. Default setting is always “off”.
3. Press and hold “ <” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision Demo: on”
will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message will disappear. Press
and hold “ <” button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images into
clear and vivid images.
Clear Vision
Off
Adjust the Clear Vision
Weak
Medium
Strong
Clear Vision Demo On or Off Disable or Enable Demo
To Next Page
Loading...
Need help?
General
Weight and Dimensions
