29
OSD Setup
Exit Enter Select
OSD Setup
Timeout
H.Position
V.Position
Transparence
USB
USB Selection
10
100
0
25
EnglishLanguage
Break Reminder Off
Auto
Off
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Transparence 0-100 Adjust the transparence of OSD
Break Reminder on /o Break reminder if the user continuously work for more than 1hrs
USB
[1]
3.2Gen1 /
2.0 / O
Turn o the USB function or select a USB version
USB Selection
Auto / USB
C / USB up
Select the path for USB Uplink Data
[1]: USB C(DP Alt)(HBR3) signal input, and when “USB” is set to “2.0”, the maximum resolution is 3440x1440@170Hz.
To Next Page
Loading...
