9
• CPC (Convex Power Control)
To reduce the risk of generating image retention, this function can automatically adjust power gain for
dierent images. Power control follows a convex mathematic model which is high in the middle and low on
two sides, so as to reduce possible image retention.
This function is “On” by default, and cannot be disabled.
• LBC (Local Brightness Control)
To reduce the risk of generating retention, the brightness of an area will be automatically lowered if the
accumulative mean brightness of this area is overly high to prevent decline of the bright eect of this area,
thereby avoiding possible image retention.
This function is “On” by default, and cannot be disabled.
• OFF RS (O Real slow) (Elimination of image retention)
Based on the characteristics of OLED panels, it is easy to produce image residue if static images with
dierent colors or brightness intervals are displayed for a long time.
In order to eliminate the image residue that may have been generated, it is suggested to run the image
residue elimination function regularly or from time to time to achieve the ideal image viewing eect.
This function can be run by the following methods:
• Manually enable the OFF-RS function in the OSD menu, select “Yes” according to the menu prompt.
• An alert will pop up automatically every time the display runs accumulatively for 4 hours to remind the
user of screen maintenance. It is recommended to select “Yes.” If “No” is selected or no selection is made,
the alert will be given once an hour after the display runs accumulatively for 24 hours until the user selects
“Yes.”
• Every time the displays run accumulatively for 4 hours, the OFF-RS function will be automatically
implemented if the display is pressed to shut down or 2 hours after the display enters the standby state.
The OFF-RS function runs for about 10 min each time. Keep power on and do not operate keys. The power
indicator will ash white (on for 1 seconds/o for 1 seconds).. The power indicator turns o at the end, and
the display enters shutdown or standby state.
When running the image residue elimination function, if the user presses the power button to turn on the
monitor or wakes up the monitor from the standby state, the image residue elimination process will be
automatically interrupted and the display screen will be restored, which will take about 5 more seconds.The
monitor automatically runs the screen compensation correction function in standby state, which will not be
interrupted.On the Other menu of the OSD, you can view the number of times the image residue removal
function runs.
•
JB(Screen compensation and correction)
To reduce the risk of generating image retention, the screen is subjected to relatively complete JB operation
every time when the display runs acumulatively for 1500 hours.
Before running the screen compensation correction, automatically run the image residue elimination, and
wait for the screen to cool down to an appropriate temperature (the whole process takes about 1 hour).
When running the screen compensation correction, please keep the power on, do not operate the button, and
the power indicator will ash white (on for 3 seconds/o for 3 seconds). When nished, the power indicator
will be o or orange, and the monitor will enter the shutdown or standby state.
When running the screen compensation correction, if the user presses the power button to turn on the
monitor or wakes up the monitor from the standby state, the screen compensation correction process will be
automatically interrupted and the display screen will be restored, which will take about 5 more seconds. The
monitor automatically runs the screen compensation correction function in standby state, which will not be
interrupted.
This setting is “ON” by default and cannot be turned o.
To Next Page
Loading...
Need help?
General
