EasyManuals Logo

AOC AGON PRO User Manual

AOC AGON PRO
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
36
Troubleshoot
Problems
Possible solutions
The power indicator is not lit.
Check if the power is turned on.
Check if the power cord is connected.
The power indicator is lit, but
there is no image display.
Check if the computer power is turned on.
Check if the graphics card of the computer is well plugged.
Check that the signal wire of the display has been correctly connected to the
computer.
Check the plug of the signal wire of the display, and make sure all pins are not
bent.
Observe the indicator through the Caps Lock key on the keypad of the computer
to conrm if the computer is working.
There is no image, but the
power indicator ashes orange.
The OLED panel malfunctions and fails to work properly. Seek advice from AOC
after-sales service persons.
Failure to realize plug-to-use.
Check if it supports plug-to-use.
Check if the adapter supports plug-to-use.
Dim image.
Adjust luminance and contrast ratio.
The image is bouncing or
rippled.
There may be electrical appliances and devices at the periphery that may cause
electronic interference.
The screen displays “the signal
wire is not available” or “no
signal.”
Check if the signal wire is correctly connected.
Check if the pin of the signal wire plug is damaged.
The OFF-RS function can be enabled and run in the display menu to eliminate
image retention which has been generated. Running this function for several times
can obtain a desirable image display e󰀨ect. For other instructions regarding screen
maintenance, refer to the User Instructions in the o󰀩cial website.
The screen displays “invalid
input”.
Check if your computer is set in an improper display mode Please re-set your
computer in the display mode listed in the detailed user instructions.
Image retention.
Based on the characteristics of the OLED panel, the OFF-RS function can
be enabled and run in the display menu to eliminate image retention which has
been generated. It is recommended to run this function for several times to
obtain a desirable image display effect. For other instructions regarding screen
maintenance, please refer to the User Instructions in the o󰀩cial website.
Regulation & Service
Please refer to Regulation & Service Information which is in the CD manual
or www.aoc.com (to find the model you purchase in your country and to find
Regulation & Service Information in Support page.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AOC AGON PRO and is the answer not in the manual?

AOC AGON PRO Specifications

General IconGeneral
VESA Mount100x100 mm
Panel TypeIPS
Response Time1ms (GTG)
Adaptive SyncNVIDIA G-SYNC Compatible, AMD FreeSync Premium Pro
PortsDisplayPort, HDMI, USB
Aspect Ratio16:9
CurvatureFlat
HDRHDR400
Stand AdjustabilityTilt, Swivel, Pivot, Height
Contrast Ratio1000:1
Color GamutDCI-P3 97%, sRGB 130%

Related product manuals