OSD Setup
1 Press (Menu) to display menu.
2 Press
∧ or ∨ to select (OSD Setup), and press (Menu) to enter.
3 Press
∧ or ∨ to select submenu.
4 Press
∧ or ∨ to adjust.
5 Press
to exit.
Language Select the OSD language
Timeout 5-120 Adjust the OSD timeout.
H. Position 0-100 Adjust the horizontal position of the OSD.
V. Position 0-100 Adjust the vertical position of the OSD.
Transparence 0-100 Adjust the Transparence of the OSD
Break
Reminder
ON/OFF
Break Reminder if the user continuely work for more than 1
hours
To Next Page
