22
OSD Setting
Basic and simple instruction on the control keys.
1. Press the MENU-button to activate the OSD window.
2. Press ∨ or∧ to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate. Press ∨ or∧ to navigate through the sub-menu. Once the desired function is
highlighted, press MENU-button to activate.
3. Press∨ or∧ to change the settings of the selected function. Press AUTO to exit. If you want to adjust any
other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press
power-button to turn the monitor on. To un-lock the OSD, press and hold the MENU-button while the monitor
is off and then press power-button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of “input select” is disable to adjust.
2. If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disabled to
adjust.
3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other functions are turned
off accordingly.
4. This production does`t have overdrive function.
To Next Page
Loading...
Need help?
General
