AOC E2236VW User Manual

21.5" LCD Color Monitor AOC e2236Vw
1
Service
Service
Service
Horizontal Frequency
30-80 kHz
TABLE OF CONTENTS
Description Page Description Page
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
Table of Contents…………………..…………………..…...1
Revision List.…...................................................……......2
Important Safety Notice.….….............................……......3
1.Monitor Specification..............................………............4
2.LCD Monitor Description……….…………………….......5
3.Operation Instruction.…………...................……...........6
3.1.General Instructions....................................…...........6
3.2.Control Buttons and Connections...............................6
3.3.Adjusting the Picture…...................................8
4.Input/Output Specification...............……………….......27
4.1.Input Signal Connector...............………..................27
4.2.Factory Preset Display Modes……..........................28
4.3.Panel Specification…………..………………………..29
5.Block Diagram….........................................................32
5.1.Main Board…..….............................................32
5.2.Power Board…………..…………………………......33
6.Schematic…………..….........................................34
6.1.Main Board..…….…...........................................34
6.2.Power Board..……….........................................38
7.PCB Layout..……….............................................41
7.1.Main Board………..…........................................41
7.2.Power Board….…..............................................42
7.3.Key Board………..…..........................................44
7.4.USB Board………..….........................................44
8.Maintainability………............................................45
8.1.Equipments and Tools Requirement…...............45
8.2.Trouble Shooting…..………...............................46
9.Firmware and DDC Instruction……………….….54
10.White-Balance,Luminance Adjustment…............69
11.Mechanical Instructions …............ .............71
12.Monitor Exploded View……................................75
13.BOM List…………..………………………............76

AOC E2236VW Specifications

General

3D	No
Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Display diagonal	21.5 \
Vertical scan range	55 - 75 Hz
Horizontal scan range	30 - 83 kHz
Viewable size diagonal	547 mm
Viewable size, vertical	268.5 mm
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	2000000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	476.6 mm
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
DVI-I ports quantity	0
Certification	cCSAus, FCC, CE, EPA, Win 7, ROHS, CCC, TUV/S, TUV
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 20 °
Number of OSD languages	15
Panel mounting interface	- mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Package depth	129 mm
Package width	588 mm
Package height	389 mm
Package weight	5600 g

Weight and Dimensions

Depth (with stand)	206 mm
Width (with stand)	531 mm
Height (with stand)	396.57 mm
Weight (with stand)	4100 g
Weight (without stand)	- g

Summary

Important Safety Notice

1.Monitor Specification

3.Operation Instruction

3.1.General Instructions

Basic setup steps, connecting cables, and turning on the monitor.

3.2.Control Buttons and Connections

Identifies monitor buttons and explains their functions and connections.

3.3.Adjusting the Picture

Instructions on how to modify picture settings via the On-Screen Display (OSD).

8.Maintainability

8.1.Equipments and Tools Requirement

Lists essential tools and equipment needed for monitor servicing.

8.2.Trouble Shooting

Provides diagnostic flowcharts for common power and video issues.

9.Firmware and DDC Instruction

9.1.Firmware Instruction

Detailed steps for updating the monitor's firmware using specific software.

9.2.DDC Instruction

Guide on DDC/EDID programming procedures for display compatibility.

10. White- Balance, Luminance Adjustment

11.Mechanical Instructions

13. BOM List