AOC E2798SH - Hotkeys

20
Hotkeys
1
Source/Auto/Exit
2
Clear vision /<
3
4:3 or wide/Volume/ >
4
Menu/Enter
5
Power
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
4:3 or wide image ratio / >
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is
4:3 or input signal resolution is wide format, the hot key is disable to adjust. ). (VGA)
Volume / >
When there is no OSD, press Volume adjust volume. (HDMI)
Source /Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure . (VGA)
When the OSD is closed, press Auto/Source/Exit button will be Source hot key function.