43
10.2 DDC Instruction
（With DELL E178FP Model for example:）
Configure and procedure
System and equipment requirements
(1). A Pentium (or above) personal computer or compatible with the print port (LPT Port).
(2). Microsoft windows 98 and above. Recommend under windows XP.
(3). Install the print port driver “PORT95NT” as the diagram below, and then restart the computer.
(4). Tool require: ISP board (Part number: 715GT034-B)/printer cable/VGA cable/signal generator/DC 12V Adaptor.
(5). Software require as below.
To Next Page
Loading...
