20
Using Coax (RF)
1. Turn off the power to the TV and Set-Top Box.
2. Using a Coax (RF) cable, connect one end to the TV OUT (RF)
on your Set Top Box and the other end to the TV IN port at the
rear of the TV.
3. Turn on the power to the TV and Set-Top Box.
4. Select TV using the INPUT button on the remote, side of the TV
or directly by pressing the TV button on the Remote Control.
Note: Refer to your Set Top Box user manual for more information about
selectin
the video or RF out
ut of the
roduct.
ENGLISH
To Next Page
Loading...
Need help?
General
