20
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the channel you
are watching will be displayed on the screen.
* The picture here shows an example of the GUIDE screen in a DTV source.
Channel Select
Press number key or ▼CH▲ button to select your desired channel.
1. ATV
The “-” button has no function in ATV mode. Directly press the number buttons to select
channels.
2. DTV
Use“-＂button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press“-＂→ press 3.
• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
• Return to the previous channel, press LAST button.
Note: “Please start auto scanning TV/DTV channels first when initial use (Refer to page#29 for TV
set up_TV source and Auto scan)”.
List
Press LIST button and there will be a small window showing program list, you can scroll through
the list to select the channel you want directly without using the ▼CH▲ button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
