To Next Page

To Previous Page

18. Tilt/Stability – All televisions must comply with recommended international

global safety standards for tilt and stability properties of its cabinets design.

Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet, which could ultimately overturn

the product.

Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could

unsuspectingly fall from the top of the set and cause product damage

and/or personal injury.

19. Wall or Ceiling Mounting – The appliance should be mounted to a wall or

ceiling only as recommended by the manufacturer.

20. Power Lines – An outdoor antenna should be located away from power lines.

21. Outdoor Antenna Grounding – If an outside antenna is connected to the

receiver, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of the mats and supporting

structure grounding of the lead-in wire to an antenna-discharge unit, size of

grounding connectors, location of antenna-discharge unit, connection to

grounding electrodes and requirements for the grounding electrode. See

Figure below.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL

CODE

Note to the CATV system installer: This reminder is provided to call the

CATV system installer’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

Please, make sure to connect the power plug to the wall outlet socket after

connecting the TV to the adapter!

22. Objects and Liquid Entry – Care should be taken so that objects do not fall

and liquids are not spilled into the enclosure through openings.

Other manuals for AOC L22W898

Questions and Answers:

Need help?

Do you have a question about the AOC L22W898 and is the answer not in the manual?

General

HD type	WSXGA+
Display diagonal	22 \
Progressive scan	No
Display brightness	300 cd/m²
Display resolution	1680 x 1050 pixels
Display technology	LCD
Native aspect ratio	16:10
Contrast ratio (dynamic)	5000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Supported graphics resolutions	1680 x 1050 (WSXGA+)
Package depth	523 mm
Package width	564 mm
Package height	150 mm
Package weight	8000 g
Plug and Play	Yes
Certification	FCC, cULus
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Product color	Black
LED indicators	Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	55 W
RMS rated power	5 W

Weight and Dimensions